Olympus Nortec 500D Flaw Detector

Description

Olympus Nortec 500D Flaw Detector is a versatile eddy current flaw detector for efficient detection of surface and subsurface defects. It features a user-friendly interface, multiple frequency capabilities, and comprehensive data analysis tools.

Olympus Nortec 500D Flaw Detector improves on previous Nortec eddy current instruments and is available in four configurations. Each configuration includes a USB port and increased resolution with reduced noise. Internal balance coils allow use of inexpensive absolute probes without the need or external balance coil adapters.

Olympus Nortec 500D Flaw Detector builtin preamp adds extra gain when needed for difficult tests. VGA output allows for the display to be projected or viewed on a standard computer screen. Olympus Nortec 500D Flaw Detector optional remote-null adapter adds convenience by allowing the probe to be nulled and the instrument screen erased from the probe.

Olympus Nortec 500D Flaw Detector Features:

• 50 Hz to 12 MHz frequency range
• Preamplifier (0 or 14 dB)
• Single Li-Ion battery, choice of two battery configurations: 2.4 Ahr or 8.8 Ahr
• Lightweight, 1.2 kg to 1.7 kg (2.8 lbs to 3.8 lbs) depending on battery configuration
• 165 mm (6.5 in.) full VGA color LCD (640 x 480 resolution)
• On-board storage of up to 200 programs
• On-screen reference memory for go/no go applications
• Internal balance loads for single coil probe support
• Display Freeze to hold flaw signals
• PowerLink technology – automatic probe recognition and instrument set-up
• Foreign Object Debris (FOD) free case design
• VGA output

Olympus Nortec 500D Flaw Detector Included:

• Olympus Nortec 500D Unit
• Hard Padded Transport Case
• Lithium Ion Battery
• External Smart Charger

 

You may also be interested in Olympus MG2 XT Ultrasonic Corrosion

Specifications:

• GENERAL
• Dimensions
• (W x H x D)216 mm x 140 mm x 61 mm (8.5 in. x 5.5 in. x 2.4 in
• Weight
• 1.2 kg to 1.7 kg (2.8 lbs to 3.8 lbs), depending upon configuration
• Display
• 133 mm x 99 mm, 165 mm diagonal (5.25 in. x 3.9 in., 6.5 in.) full VGA color LCD (640 x 480 pixels)
• Operating temperature
• –10 ºC to 55 ºC (14 ºF to 122 ºF)
• Humidity
• 5% to 95%
• Classification
• Based on Class 2 specifications from the MIL-PRF-28800F handbook
• Altitude
• Maximum operating and non-operating altitude – 4600 m (15,000 ft)
• Hazardous area operation
• Safe operation as defined by Class I, Division 2, Group D, as found in the National Fire Association Code (NFPA
• 70),
• Section 500, and tested using MIL-STD-810F, Method 511.4, Procedure 1
• Probe types
• Absolute and differential in either bridge or reflection configuration. The instrument is fully compatible with Nortec
• PowerLink probes.
• Alarms
• Can be set to trigger on positive or negative box, polar, or sweep alarm settings
• Alarm modes
• 1 to 3 box gates, polar, sweep, conductivity, and coating thickness
• Trace storage
• Up to 200 traces can be stored for recall. The traces can be static or frozen and can contain up to 60 seconds of
• movement. The traces are stored with the date and time of capture.
• Program storage
• Up to 200 instrument set-ups may be stored and recalled. The date and time of storage is recorded with each set-up.
• Print out
• Provides a custom configurable report header containing the display screen data and probe parameters including
• serial numbers (PowerLink probes only)
• MEASUREMENT
• Frequency range
• 50 Hz to 12 MHz
• Gain
• 0 dB to 90 dB in 0.1 dB steps. The horizontal and vertical gains may be adjusted separately or together.
• Rotation
• Variable 0º to 359º in 1º steps
• Sweep
• Variable from 0.005 s to 4 s per divisionLow Pass filter
• 10 Hz to 500 Hz and wide band
• High Pass filter
• Off or 2.0 Hz to 500 Hz, 2 pole response
• Built-in preamplifier
• 5X (14 dB) additional gain.
• Probe drive
• 2 volts, 6 volts, 12 volts
• Variable persistence
• 0.1 s to 5 s