Name: Sonatest Sitescan 500S Flaw Detector
Brand: Sonatest
SKU: SS500SFD
Availability: InStock

Description

Sonatest Sitescan 500S Flaw Detector offers the end user an entry level broad band flaw detector with full VGA display, sync and proportional outputs and a 50nS (Spike) 200V Pulser.

Sonatest Sitescan 500S Flaw Detector high levels of near surface resolution, penetrating power and excellent signal to noise ratio are key functions in the Sitescan range. Sonatest Sitescan 500S Flaw Detector has a color transflective VGA display, providing high visibility in any lighting condition and the enhanced user interface and full A-Scan display is available at the touch of a button.

Sonatest Sitescan 500S Flaw Detector enclosure is constructed using impact resistant materials and is designed to meet IP67 standards, Sonatest Sitescan 500S Flaw Detector offering excellent water resistance and harsh conditions. Sonatest Sitescan 500S Flaw Detector typical applications are Weld Fabrication, Corrosion Detection, Forgings & Castings and general UT inspection.

Sonatest Sitescan 500S Flaw Detector enclosure is constructed using automotive grade impact grade impact resistant materials and offers excellent water resistance.

Sonatest Sitescan 500S Flaw Detector Features:

Customizable & Intuitive Menus
Split DAC / DGS (AVG)
Angle Measurement Mode
Configurable on-board software
Field upgradeable
Encoded B-Scan
A-Scan Fade
4 GB on-board memory
USB Interface for PC import/export
Video Output for training

Sonatest Sitescan 500S Flaw Detector Included:

Sitescan 500S Digital Flaw Detector
Battery, Charger, Charger mains cable
User Guide & Calibration Certificate
Certificate of Conformance
Carry Bag
UTLity & USB cable
Display Window Cover
Ultrasonic Couplant

You may also be interested in Sonatest SiteScan 380M Flaw Detector

Specifications:

Test Range	1mm (0.4in) to 10,000mm (394in)
Velocity	1000 – 10,000m/s continuously variable
Probe Zero	0 to 1000μs
Delay	0-10,000m (400in) in steel at 5930m/s (19455f/s)
Gain	0 to 110dB adjustable in 0.5, 1, 2, 6, 10, 14 and 20dB steps
Test Modes	Pulse echo and transmit/receive
Pulser	200V fixed. 50nS square wave. Rise/Fall times <15nS into 50R load
Damping	50 and 400 Ohm damping selectable
P.R.F.	Adjustable 5Hz to 1kHz. External sync also available
Screen Update Rate	60Hz
Rectification	RF, Full wave, +ve half-wave and -ve half-wave
Frequency Range	1.0MHz to 14MHz (-3db)
System Linearity	Vertical = 0.5% Full Screen Height (FSH). Horizontal +-0.2% Trace Full Screen Width (FSW)
Reject (Selectable)	Up to 80% Linear reject (removes baseline noise without affecting indication amplitude)
or	Up to 50% Suppressive reject (increase zero offset and reduces amplitude of all echoes) LED Warning when active.
Units	Metric (mm), Imperial (in)
Display	Color Transflective VGA (640 x 480) TFT. Display area: 116.16 x 87.2 mm (4.57 x 3.43 in). A-Scan Area: 400 x 510 pixels (normal), 460 x 620 (FS). Colors: 9 color options with variable brightness
Gate Monitor	Two independent gates for measurement and monitoring. Start and width fully adjustable over the entire range of the instrument. Levels adjustable from 0% to 100%, positive or negative triggering on each gate with audible & visual alarms. Gate resolution is 5nS
Zoom	Expands range and delay to cover the area set by Gate 1 start & width controls
AGC	Automatic Gain Control automatically sets the signal in Gate 1 to a level between 10% and 90% FSH, tolerance between 5% and 20%.
Measurement Modes
Mode 1	Signal monitor, Gate alarms can be active but no measurements are displayed
Mode 2	Depth and amplitude of first signal in gate
Mode 3	Echo-Echo distance measurements
Mode 4	Trigonometric display of beam-path, surface distance (including X-offset) and depth of indication from the inspection surface together with echo amplitude. Curved surface correction can be applied for convex and concave surfaces. Half-skip can be indicated on screen
Mode 5	Gate to Gate distance measurement
Mode 6	Flank to Flank
Mode 7	Beam Angle, calculated from beampath, hole radius and hole centre depth

Measurement Display	Live display and updates on screen at 10 times per second. Large display of a single measurement available
Waveform Smoothing Select from:	i) None (both min and max values are displayed in the A-Scan)
	ii) Fill (Min values set to baseline value, produces a solid A-Scan)
	iii) Smooth (min values ignored, produces a clear outline
Auto-Cal	Provides automatic calculation of velocity and probe zero from 2 reference echoes. Automatic calibration with two echoes
Reference Waveform	Displays a previously stored A-log in a color different from the active display: enabling a quick visual check of the differences
Clock	Built in, battery-backed RTC keeps time and date. Visible on the status line, always stored with Panels, A-logs etc.
Internal Memory	4GByte storage available for A-scans, panels, T-logs, B-logs etc. 450,000 Panels, 200,000 A-Logs, 300,000 B-Charts, 440,000 T-Logs
Active Peak Memory	Retains all A-scans on screen for echo-dynamic pattern analysis, with the active A-scan displayed in a separate color
Notes	Alphanumeric labelling for panel stores, A-logs, B-logs etc.
Display Freeze	Hold the current waveform on screen for off-line processing
Help Key	Shows software and hardware information
Language Support	Multiple languages are selectable from a list including: English, French, Spanish, Russian, Chinese (Modern). Others are available on request
Encoder Connection	Lemo min 4-pin connector
Video Output	Standard on 500S
Proportional Outputs	Available on 500S
External Sync	Available on 500S
USB Connection	Internal storage shown as Memory Device
Transducer Sockets	BNC or LEMO (factory option)
Power	Battery life for SS500 is 13.5 hours and for D-50 it is 10.5 hours.
Charger	100-240VAC, 50-60Hz
Environmental	Case sealed to IP67
Temperature	Operating -10°C to 55°C (14°F – 131°F). Storage -40°C to 75oC (-40°F – 167°F)
Size	H 145mm x W 255mm x D 145mm (5.7in x 10 in x 5.7in)
Weight	2.5kg (5.5lbs) with battery
Warranty	2 year
Extended Warranty	Sonacover – extended 5 year warranty, including 4 calibrations
Calibration Standard	ISO 22232-1:2020 (Detailed Specification available on request)
Standards	Vibration to 514.5-5 Proc 1 Annex C Fig 6 Shock 516.5 Proc 1 15g/6ms Explosive atmospheres – MIL-STD 810G Methos 511.5, Procedure I