Best Discounts
The best discounts this week
Every week you can find the best discounts here.
50%
Original price was: $15,000.00.$7,500.00Current price is: $7,500.00.
Trimble SPS855 GNSS Modular Receiver
50%
Original price was: $9,000.00.$4,500.00Current price is: $4,500.00.
Trimble S6 Robotic Total Station
50%
Original price was: $14,000.00.$7,000.00Current price is: $7,000.00.
Trimble RTS 773 Robotic Total Station
50%
Original price was: $9,000.00.$4,500.00Current price is: $4,500.00.
Trimble R8s Integrated GNSS System
50%
Original price was: $7,000.00.$3,500.00Current price is: $3,500.00.
Trimble R2 Integrated GNSS System
50%
Original price was: $15,000.00.$7,500.00Current price is: $7,500.00.
Trimble R12i GNSS Receiver System
50%
GE Krautkramer USN 60 Ultrasonic Flaw Detector
In Stock
Manufacturer: GE Inspection Technologies
Model: GE Krautkramer USN 60 Ultrasonic Flaw Detector
Included: GE Krautkramer USN 60 Ultrasonic Flaw Detector with Accessories
In Stock
Description
GE Krautkramer USN 60 Ultrasonic Flaw Detector has optimized its USN 60 series for use in direct sunlight and operation at extreme temperatures. These new characteristics make the instruments ideally suited for outdoor use with its increased long battery operation time.
The combination of the rugged USN durability, 11 hours of battery operation, fast rotary knob operation, outstanding ultrasonic performance, and the ﾓsquare wave pulserﾔ form a powerful portable ultrasonic inspection tool.
GE Krautkramer USN 60 Ultrasonic Flaw Detector Features:
- Simple operation with fast rotary knob adjustments; gain is always directly accessible with the left-hand rotary knob and lockable.
- Auto CAL makes calibration fast & easy.
- 15 Hz to 6 kHz (spike mode) PRF and 15 Hz to 2 kHz (square mode) PRF (pulse repetition frequency)
- 2 independent gates monitor amplitude and soundpath distance for both flaw detection and thickness measurement applications.
- 250 KHz to 25 MHz frequency range.
- RF display mode enhances signal evaluation and bond inspection of dissimilar materials.
- 4 selectable damping settings (50, 75, 150, 500 ohms) for optimum probe performance.
- 1 mm to 28 m (0.040ﾔ to 1100ﾔ) range (in steel) covers thin to lengthy acoustically clean materials.
- dB REF key evaluates subsequent echoes gain value and amplitude against the highest echo in Gate A (reference echo) when activated.
- IF (Interface) Gate Option for automatic start of the display, Gate A, Gate B, and / or DAC / TCG for immersion testing applications.
- VGA Output Option provides an easy way to connect to a PC monitor or PC projector for viewing by large audiences or training purposes.
- RF Output Option outputs the raw RF waveform via a standard Lemo connector for further analysis.
- BEA (Backwall Echo Attenuator) Option allows independent gain control of the region under Gate B for backwall echo monitoring.
- 19ﾔ Rack Mount Model.
Included:
- GE Krautkramer USN 60 Ultrasonic Flaw Detector with Accessories
You may also be interested in Ge Krautkramer NDT Spotchecker Sensing & Inspection
Specifications:
| Range USN 60 | 0.040ﾔ to 1100ﾔ (1 mm to 28 m) at steel velocity; range selectable in fixed steps or continuously variable |
| Material Velocity | Continuously adjustable from 0.0098 to 0.6299 inches/µs (250 to 16,000 m/s); 65 selectable material velocities |
| Display Delay | -20 to 3498 µs in steel (dependent on range) |
| Probe Delay/Zero Offset | 0 to 999.9 µs |
| Damping | 50, 75, 150, 500 ohms |
| Gain | 0 to 110 dB adjustable in selectable steps 0.1, 0.5, 1.0, 2.0, 6.0, user definable, and locked |
| Test Modes | Pulse echo, dual, and thru-transmission |
| Pulser | Square wave excitation pulse |
| Pulse Voltage (Square wave pulser mode) | 50 to 450 V scrollable in 10 V adjustments |
| Pulse Width (Square wave pulser mode) | Tunable from 50 to 1000 ns in 10 ns adjustments |
| Pulse Energy (Spike mode) | Low, High |
| Pulse Repetition Frequency USN 60 | Autolow, autohigh, manually adjustable from 15 to 6000 Hz (spike mode) and 15 to 2000 Hz in square wave mode, in 5 Hz increments, external trigger (spike mode only) |
| Bandwidth (amplifier bandpass) | 0.25 to 25 MHz with 10 selectable settings including broadband |
| Gate Monitors | Two independent flaw gates controllable over entire sweep range |
| Measurement Modes | Zero-to-first, multi-echo with selectable flank or peak detection |
| Rectification | Positive halfwave, negative halfwave, fullwave, RF |
| Reject (suppression) | 0 to 80% linear |
| Units | Inch, millimeter, or microsecond selectable |
| Operating Temperature | -20° to 55°C (-4° to 130°F); -25° to 70ºC (-13° to 158 º F ) storable |
| Languages | Selectable English, German, French, Spanish, Italian, Portuguese, Norwegian, Swedish, Finnish, Danish, Dutch, Russian, Czech, Romanian, Slovakian |
| Probe Connectors | BNC or Lemo |
| Keypad | International symbols |
| Battery Power | Lithium Ion battery pack; NiMH, NiCad or alkaline cells substitutable |
| Battery Life | 11 hours on Li-Ion battery pack |
| Size | 11.1ﾔ W x 6.75ﾔ H x 6.25ﾔ D (282 x 171 x 159 mm) |
| Display | 640 x 480 pixels Color LCD 132.48 x 99.36 mm |
| Weight | 6.6 lbs. (3.0 kg) Li-Ion battery; 3.5 lbs.(1.6 kg) without battery |
| Color Leg | Easy identification of leg and skip distances for angle beam inspection in A-scan or grid background colors |
| Weld Rating Calculation | Simplifies the rating of weld indications according to AWS specification D1.1, (formula D=A-B-C) |
| Dust Proof/DrippingWater Proof | As per IEC 529 specification for IP54 classification |
| Compliance | EMC/EMI: EN 55011:2007, EN 61000-6-2:2005 Ultrasound: EN 12668, ASTM E317 |
Additional information
| Weight | 10 kg |
|---|---|
| Dimensions | 60 × 60 × 50 cm |
Be the first to review “GE Krautkramer USN 60 Ultrasonic Flaw Detector”
Related products
50%
Olympus Epoch XT Ultrasonic Flaw Detector
Original price was: $4,600.00.$2,300.00Current price is: $2,300.00.
In Stock
50%
Olympus Omniscan MX2 32:128 Flaw Detector
Original price was: $11,000.00.$5,500.00Current price is: $5,500.00.
In Stock
50%
GE Inspection Mentor EM Eddy Current Flaw Detector NDT
Original price was: $4,800.00.$2,400.00Current price is: $2,400.00.
In Stock
50%
Sonatest Masterscan 700M Flaw Detector
Original price was: $11,000.00.$5,500.00Current price is: $5,500.00.
In Stock
50%
Sonatest Veo Plus Flaw Detector
Original price was: $8,200.00.$4,100.00Current price is: $4,100.00.
In Stock
50%
Sonatest SiteScan 380M Flaw Detector
Original price was: $4,200.00.$2,100.00Current price is: $2,100.00.
In Stock
Reviews
There are no reviews yet.