Trimble SPS855 GNSS Modular Receiver

Description

Trimble SPS855 GNSS Modular Receiver provides you the flexibility to execute all of your construction site measurements. As a long-term or semi-base channel, it provides GNSS corrections for site dimensions and machine management. As a rover, it can move readily from a site supervisor truck into a rod mount for grade checking, site dimension, and stakeout.

As it can be utilized as a highly dependable base station or rover, you may use the Trimble SPS855 in a variety of places, including onsite cottages and trailers, vehicles and light machines. Simply place the receiver where it could be protected from both weather and theft, and then place the external GNSS antenna in which it has a clear view of the sky.

The internet user interface of the Trimble SPS855 permits you to get into the base wherever you’re, eliminating downtime along with email alerts. You can also remotely monitor and reconfigure base channels.

Trimble SPS855 GNSS Modular Receiver Features:

• Base station for precision GNSS applications such as site positioning and machine control
• Location RTK for site vehicle and supervisors
• Precision RTK rover on-site
• System integrator applications using Location GNSS augmentation, including RTX, OmniSTAR, Location RTK, SBAS, and DGPS RTCM and Precision RTK

Included:

• Trimble SPS855 GNSS receiver
• Firmware 5.03
• UHF Transmit Enabled
• GLONASS Enabled
• 403-470MHz internal tx/rx radio
• Whip antenna
• 2-meter antenna cable
• Trimble Zephyr 2 GNSS antenna
• 900 MHz Radio Antenna
• External Antenna Kit
• Serial Data Cable
• Multiport Data Adapter
• 120v Wall Charger
• 12v Power Supply with Alligator Clips

You may also be interested in Trimble S6 Robotic Total Station

Specifications:

• Integrated GNSS receiver and radio
• The following options and upgrades are available for this receiver:
• Location RTK
• Location RTK with Precise Vertical
• Precision RTK base
• Precision RTK rover
• Precision RTK base and rover
• Moving Base/Heading
• GLONASS
• Galileo
• BeiDou
• Data logging (32 MB)
• 2 watt output for interval 450 UHF radio
• 1PPS (Construction version only); it is standard on the Marine version
• Trimble xFill™ RTK service is available as a one-time purchase option for rover systems with the SPS855 modular receiver.
• 450 MHz (403 MHz to 473 MHz) or 900 MHz internal radio. The 450 UHF is a wideband 403 MHz to 473 MHz radio.
• Supports the SNM941 cellular modem
• Upgradeable receiver from Location GPS to Precision RTK modes. The modes are:
• Location GPS precision at sub meter
• Location RTK precision of 10 cm horizontal and 10 cm vertical
• Location RTK precision of 10 cm horizontal and 2 cm vertical
• Precision RTK mode for highest 3D accuracy. Optional Base only, Rover only, or Base/Rover modes.
• 440-channel L1/L2C/L5 GPS and QZSS plus L1/L2 GLONASS receiver, Galileo, BeiDou
• Trimble CenterPoint® RTX and OmniSTAR XP/HP/VBS service capable
• 4-channel WAAS (Wide Area Augmentation System), EGNOS (European Geo-Stationary Navigation System), and MSAS Satellite Based Augmentation (SBAS) compatible
• Long-life integrated battery, typically provides 9 hours operation as a base station or 12 hours operation as a rover with internal transmit/receive radio
• Configuration and monitoring interface through the following methods:
• Web interface
• Networked or peer-to-peer Ethernet
• Integrated display and keyboard
• Trimble Siteworks™ or SCS900 Site Controller software
• Choice of external GNSS antenna for base station or rover receiver operation. See GNSS antenna chart.
• Small, lightweight design – 1.65 kg (3.64 lbs) receiver only, including the battery; 4 kg (8.82 lbs) complete system weight (rover including controller and rod)
• Permanent/semi-permanent and mobile quick setup base station capability
• Backpack, belt, rod, truck, and marine vessel mounting options for rover applications
• Front panel display can be inverted for use on cabin wall mounting
• Capable of all site measurement and stakeout operations within radio or cellular coverage
• Easy-to-use menu system for rapid configuration and status checking
• AutoBase technology for rapid and automated repeated daily base station setups
• Can broadcast corrections through multiple radio links from one base station, for example, through an internal 450 MHz radio and an external 900 MHz radio or over the internet
• Rugged, weatherproof construction with an IP67 environmental rating
• –40 °C to +65 °C (–40 °F to +149 °F) operating temperature range
• 10.5 V to 28 V DC input power range, with over-voltage protection on a 26-pin connector
• 11.5 V to 28 V DC input power range with over-voltage protection on a Lemo connector to prevent deep discharge of external batteries
• Capable of rover operation within a VRS network and Internet Base Station service
• Moving baseline and heading capability when the SPS855 receiver is combined with any SPS85x or SPS55xH receiver (ensure that Moving Base/Heading mode is installed on each SPS855 receiver).
• RoHS and WEEE compliant
• 1 pulse-per-second (1PPS) output – standard on Marine version, optional on Construction version