Name: Thermo Scientific Miran Sapphire 205B
Brand: Thermo Fisher Scientific
SKU: TSMS205B
Availability: InStock

Thermo Scientific Miran Sapphire 205B

~~$6,800.00~~ $3,400.00

In Stock

Manufacturer: Thermo Scientific
Model: Miran Sapphire 205B
Included: 2 Battery Packs (8 hours total run), Charger Cables, RS-232 cable, Thermoconnect software, Manual.

In Stock

Description

Thermo Scientific Miran Sapphire 205B is a family of portable, lightweight infrared instruments that can monitor ambient air in workplace environments for the purpose of detecting the presence of gases. Thermo Scientific Miran Sapphire 205B exclusive design of the wavelength generator filter allows accurate and fast wavelength selection separating the MIRAN SapphIRe Analyzer from other portable gas analyzers.

Thermo Scientific Miran Sapphire 205B contains a single-beam infrared spectrophotometer to specifically and accurately measure many gases with a single unit. Thermo Scientific Miran Sapphire 205B results of this analysis can be displayed in parts per billion (ppb), parts per million (ppm), percent (%), mg/m3, or absorbance units

Thermo Scientific 205B models can be configured with two options: intrinsic safety certification and spectral scanning using Thermo Scientific ThermoMatch Spectrum Correlation Software.

Thermo Scientific Miran Sapphire 205B Applications:

Industrial hygiene monitoring
Emergency responce analysis
Indoor air quality studies
Hospital gas monitoring
Fume hood/Tracer gas testing
Leak detection

Features:

Exclusive wavelength generator filter design
Library of up to 121 components
Sensitive for sub-ppm detection
Versatile and upgradable
Lightweight and portable

Included:

2 Battery Packs (8 hours total run)
Charger Cables
RS-232 cable
Thermoconnect software
Manual

You may also be interested in Thermo Fisher Scientific Niton XL2 600

Specifications:

Measurement Range	See Appendix H for each compound range.
Concentration	Compound Dependent
Absorbance	0.000 to 1.2 Au (practical upper limit)
Measurable Gases	SapphIRe-DL: up to 5 gases in a background of 5 additional gases. Storage for up to 10 single gas and 10 multigas applications. SapphIRe-SL: same as SapphIRe-DL, except factory calibrated for 50 single gases. SapphIRe-XL: same as SapphIRe-SL, except factory calibrated for 120 single gases.
Output	Digital readout of concentration (ppb, ppm, %, mg/m3 ) or absorbance units (AU). Also connections for analog output, relay contacts, parallel port (printer) and serial communication (RS232).
Wavelength	Seven fixed bandpass filters and one continuously linear variable filter (7.7 to 14.1 microns). The seven fixed wavelengths are: 1.859 water vapor, 3.333 general hydrocarbons, 3.573 formaldehyde, 4.004 reference, 4.250 carbon dioxide, 4.500 nitrous oxide, and 4.620 carbon monoxide.
Pathlength	Two user-selected settings: 0.5 and 12.5 meters nominal
Battery Pack	Type: Internal, rechargeable, sealed, intrinsically safe NiCd (NickelCadmium) battery pack. Voltage: 7.2 V nominal. Capacity: 5.7 Ah.
Battery Operating Time	Up to four hours of continuous operation at 23°C.
Battery Recharge Time	Four hours after complete discharge if analyzer is off. Approximately two hour for each hour of discharge from full capacity if analyzer of off.
Operator Error Alarm	User definable: none, double beep, error screen.
Concentration Alarm	Low, High, and STEL
Power Requirements of ac/dc Converter	95 to 260 V ac at 50/60 Hz, ±3% or 11 to 15 V dc, 5 A (from automobile battery with optional dc power cable)
Measurement Cycle Time	Single gas analysis screen updated each half-second. Dependent upon application in multigas mode or if compensations are enabled.
Reference, Operating, and Storage Conditions	See Table 2-2.
Electromagnetic Compatibility (EMC)	Complies with the requirements of the European EMC Directive 89/336/EEC.
Sample Flow Rate	14 liters/minute (nominal) with sampling wand and particulate filter.
Sample Cell Volume	2.23 liters
Gas Purging	5 volumes of sample required to purge cell by 99%.